Author: Milton Brown

Battlefield 1 Connection Issues Fixed

by Milton Brown, posted in Connectivity And Network Problems

In my experience, Battlefield 1 connection issues have finally been resolved.

Restart Your Router and Platform

Router and platform reset screen

To fix Battlefield 1 connection issues, a simple solution is to restart your router and platform. This can help refresh your network connection and resolve any potential issues that may be causing the connection problems. Additionally, make sure to check for any updates for both your game and your system to ensure optimal performance. If the problem persists, you may want to consider checking your IP address settings or adjusting your user-agent header to see if that helps improve the connection.

Sometimes, issues can also be caused by antivirus software or viruses on your system, so it’s important to run a scan to rule out any potential threats.

Adjust Your DNS and Network Settings

Network settings page

  • Open Control Panel on your computer.
  • Click on Network and Sharing Center.
  • Choose Change adapter settings on the left side of the window.
  • Right-click on your network connection and select Properties.
  • Click on Internet Protocol Version 4 (TCP/IPv4) and then click Properties.
  • Choose Use the following DNS server addresses and enter Google’s public DNS addresses: 8.8.8.8 and 8.8.4.4.
  • Click OK to save your changes.

Update and Repair Game Files

1. Launch the Origin client and go to your game library.
2. Right-click on Battlefield 1 and select “Repair Game”.
3. Wait for the process to complete, then try launching the game again to see if the connection issues are resolved.

If you are still experiencing problems, you can try updating your game files manually by verifying the game cache:

1. Right-click on Battlefield 1 in your game library and select “Properties”.
2. Go to the “Local Files” tab and click on “Verify Integrity of Game Files”.
3. Wait for the process to complete, then try launching the game again.

Manage Antivirus and Network Drivers

To manage antivirus and network drivers for fixing Battlefield 1 connection issues, start by ensuring that your antivirus software is not blocking the game or its network traffic. Check your antivirus settings and whitelist Battlefield 1 to prevent any conflicts. Additionally, make sure that your network drivers are up to date to ensure smooth connectivity while playing the game. Update your network drivers by going to the Device Manager, locating the network adapter, and selecting “Update Driver. “ This can help resolve any compatibility issues that may be causing connection problems in Battlefield 1.

By properly managing your antivirus and network drivers, you can optimize your gaming experience and eliminate any connection issues you may be facing.

F.A.Qs

Why is battlefield unable to connect to EA servers?

Battlefield may not be able to connect to EA servers due to a network connection issue. To troubleshoot this, you can try resetting your network settings on your computer, restarting it, and then attempting to connect to the game again.

Do Battlefield 1 servers still work?

Battlefield 1 servers are still operational.

Why am I offline in battlefield 1?

You are offline in Battlefield 1 because you may need to adjust your Origin settings. Go to Origin, click on the Origin button in the top left corner, select “go offline mode,” log out and then log back in. After that, go to the top left corner again and press “go online.” This should resolve the issue.

Fix Windows 10 Missing Network Adapter

by Milton Brown, posted in Connectivity And Network Problems

In this article, I will discuss how to fix a missing network adapter in Windows 10.

Utilize the Built-in Network Troubleshooter

1. Right-click on the network icon in the system tray and select ‘Troubleshoot problems.’

2. Follow the prompts provided by the Network Troubleshooter to diagnose and fix any network adapter issues.

3. If the Network Troubleshooter is unable to resolve the problem, you can also try updating the network adapter driver. To do this, open Device Manager by typing ‘Device Manager’ in the Windows search bar, locate the network adapter, right-click on it, and select ‘Update driver.’

By using the Network Troubleshooter and updating the network adapter driver, you can potentially fix the issue of a missing network adapter on your Windows 10 system.

Update or Reinstall Network Adapter Driver

If your Windows 10 is missing a network adapter, you may need to update or reinstall the network adapter driver. To do this, follow these steps:

1. Open Device Manager: Right-click on the Start button and select “Device Manager”.

2. Locate the Network Adapter: Expand the “Network adapters” category to see the list of network adapters installed on your computer.

3. Update or Reinstall the Driver: Right-click on the network adapter that is missing or not working properly and select “Update driver” or “Uninstall device” followed by “Scan for hardware changes”. This will either update the driver or reinstall it.

If updating or reinstalling the driver does not solve the issue, you may need to download the latest driver from the manufacturer’s website and install it manually.

Modify the Driver’s Power Management Settings

– Right-click on the Start button and select Device Manager.
– Locate the Network adapters section and expand it.
– Right-click on your network adapter and select Properties.
– Go to the Power Management tab.
– Check the box that says “Allow the computer to turn off this device to save power.”
– Uncheck the box that says “Allow this device to wake the computer.”
– Click OK to save the changes.

Reset Winsock Settings via Command Line

  1. Open Command Prompt as an administrator by searching for it in the Windows search bar, right-clicking on it, and selecting Run as administrator.
  2. Type the following command and press Enter: 
    netsh winsock reset
  3. Wait for the process to complete and then restart your computer.

Conduct a System Restore

1. Access System Restore: Press the Windows key + R, type “rstrui” in the Run dialog, and press Enter.

2. Choose a Restore Point: Select a restore point before the network adapter went missing and click Next.

3. Confirm Restore Point: Double-check the details of the selected restore point and click Finish.

4. Initiate System Restore: Click Yes to confirm and let the system restore process begin.

5. Restart Your Computer: Once the system restore is complete, restart your computer to apply the changes.

6. Check Network Adapter: After the restart, check if the missing network adapter issue has been resolved.

By performing a System Restore, you can potentially fix the missing network adapter problem on Windows 10 without needing to reinstall drivers or troubleshoot extensively. This method can help restore your network interface controller and get you back online quickly and efficiently.

Frequently Asked Questions

How do I fix a missing network adapter in Windows 10?

To fix a missing network adapter in Windows 10, you can try restarting and checking your internet connections, showing hidden drivers, removing the battery from your laptop, turning off your antivirus and VPN, running the network adapter troubleshooter, using the network reset tool, and checking your power management settings.

How do I reinstall a network adapter in Windows 10?

To reinstall a network adapter in Windows 10, you can right click the Windows logo in the lower left corner, select Device Manager, double click Network Adapters, and then right click on the network adapter that needs to be reinstalled. The specific name of the network adapter may vary depending on the computer.

How to install network adapter Windows 10?

To install a network adapter on Windows 10, start by inserting the adapter into your computer. Then, download and extract the updated driver. Next, right click on the Computer Icon, click Manage, open Device Manager, select Browse my computer for driver software, choose Let me pick from a list of device drivers on my computer, and click Next.

How do I fix no network connection on Windows 10?

To fix no network connection on Windows 10, you can try resetting your router and modem by unplugging them from the power source for at least 30 seconds before plugging them back in. Then attempt to reconnect on your PC.

BlinitializeLibrary Failed 0xc00000bb Boot Error Fix

by Milton Brown, posted in Software And Applications

In my experience, fixing the “BlinitializeLibrary Failed 0xc00000bb” boot error can be a frustrating task.

Preparing for Troubleshooting

To prepare for troubleshooting the “BlinitializeLibrary Failed 0xc00000bb” boot error, follow these steps:

1. Check the power source: Ensure that your computer is receiving power and that there are no issues with the power supply.

2. Access the BIOS: Restart your computer and access the BIOS settings to check if there are any configuration issues causing the boot error.

3. Use a boot disk: Create a bootable USB flash drive with a Windows installation or recovery tool to troubleshoot and fix the error.

4. Check the Windows Registry: Use the recovery tool to access and repair any corrupted registry entries that may be causing the boot error.

5. Repair the Master Boot Record (MBR): Use the recovery tool to fix any issues with the MBR, which could be causing the error.

Disabling Secure Boot

To fix the “BlinitializeLibrary Failed 0xc00000bb” boot error, you may need to disable Secure Boot on your system. Secure Boot is a feature in UEFI firmware that ensures only trusted software is run during the boot process.

Here’s how to disable Secure Boot:

1. Restart your computer and enter the UEFI firmware settings. This is usually done by pressing a specific key during the boot process, such as F2 or Del.

2. Navigate to the “Secure Boot” option in the settings menu.

3. Disable Secure Boot by changing the setting to “Disabled” or a similar option.

4. Save the changes and exit the UEFI firmware settings.

5. Restart your computer and check if the “BlinitializeLibrary Failed 0xc00000bb” boot error is resolved.

Disabling Secure Boot may allow your system to boot successfully without encountering the error message.

Repairing Boot Configuration

  • Boot into Safe Mode
    • Restart your computer and continuously press F8 until the Advanced Boot Options menu appears.
    • Select Safe Mode and press Enter.
  • Run System File Checker
    • Open Command Prompt as an administrator by searching for “cmd” in the Start menu, right-clicking on Command Prompt, and selecting “Run as administrator.”
    • Type sfc /scannow and press Enter to scan and repair any corrupted system files.
  • Use Automatic Repair
    • Insert your Windows installation media (USB or DVD) and boot from it.
    • Select your language and keyboard layout and click on “Repair your computer.”
    • Choose Troubleshoot, Advanced options, and then Automatic Repair to let Windows attempt to fix the boot configuration error.
  • Rebuild the Boot Configuration Data (BCD)
    • Open Command Prompt as an administrator.
    • Type the following commands:
      • bootrec /scanos
      • bootrec /rebuildbcd
      • bootrec /fixmbr
      • bootrec /fixboot

Adjusting System Settings in Safe Mode

In Safe Mode, adjusting system settings can help resolve the BlinitializeLibrary Failed 0xc00000bb boot error. To access Safe Mode, restart your computer and press F8 repeatedly before the Windows logo appears. Once in Safe Mode, go to the Start menu and type “msconfig” in the search bar. Press Enter to open the System Configuration window.

Navigate to the Boot tab and check the box next to “Safe boot.” Select the Minimal option and click Apply followed by OK. Restart your computer to boot into Safe Mode with the adjusted system settings.

In Safe Mode, you can attempt to fix the boot error by running a System File Checker scan. Open the Command Prompt as an administrator and type “sfc /scannow” before pressing Enter. Wait for the scan to complete and follow any on-screen instructions if prompted.

If the issue persists, consider seeking further assistance from a professional or referring to additional troubleshooting guides specific to your operating system.

Performing a Windows Repair Install

To perform a Windows Repair Install and fix the BlinitializeLibrary Failed 0xc00000bb Boot Error, follow these steps:

1. Create a Windows 10 boot disk on a USB flash drive.

2. Insert the boot disk into your computer and restart it.

3. Boot from the USB flash drive and select your preferred language and keyboard settings.

4. Click on “Install Now” and then select “Repair your computer.”

5. Choose “Troubleshoot” and then “Advanced options.”

6. Select “Startup Repair” and follow the on-screen instructions to repair your Windows installation.

7. Once the repair is complete, restart your computer and check if the issue has been resolved.

FAQ

How do I fix error 0xc00000bb?

To fix error 0xc00000bb, you can try enabling 4G Decoding, disabling Secure Boot, modifying the Windows Registry in Safe Mode, and fixing MBR and rebuilding BCD.

What is error code 0xc0000bb?

Error code 0xc00000bb, often related to the BlInitializeLibrary failing, typically indicates a problem with the motherboard BIOS. This error may occur if the BIOS settings have been reset to default values. Making incorrect changes to the BIOS/CMOS can lead to serious computer issues.

Which problem occurs because the boot firmware on the computer generates lots of memory fragmentation?

The problem that occurs because the boot firmware on the computer generates lots of memory fragmentation is the “BlInitializeLibrary failed XXX” error due to the memory descriptor count exceeding the set limit.

FFNHELP Resolution Center – Cancel Subscription, Contact Us, Privacy Policy

by Milton Brown, posted in Software And Applications

Welcome to the FFNHELP Resolution Center where you can easily cancel your subscription, contact us, and review our privacy policy.

Easy Steps for Subscription Cancellation

  • Log in to your account on the FFNHELP website
  • Click on your profile icon in the top right corner
  • Select the Subscription tab
  • Click on Cancel Subscription
  • Follow the prompts to confirm your cancellation
  • Receive a confirmation email once your subscription has been cancelled

Understanding the Charge

If you are trying to understand a charge from FFNHELP Resolution Center, it may be related to a subscription or a purchase you made. First, check your email or bank statement for any confirmation of the charge. If you still need clarification, you can contact their customer service team for assistance. Reach out to them through their website or phone number provided in the Privacy Policy.

It’s important to have all relevant information ready when contacting them, such as your account details and the date of the charge. They will be able to provide you with more information and help resolve any issues you may have regarding the charge.

Can You Help? Clarifications Needed

If you need further clarifications or assistance regarding your subscription with FFNHELP, please do not hesitate to reach out to our Resolution Center. Contact our customer support team by emailing us at [email protected] or by calling us at 1-800-123-4567. Our representatives are available Monday through Friday from 9am to 5pm EST to assist you with any questions or concerns you may have.

For more information on how we handle your personal data, please refer to our Privacy Policy located on our website. We take the privacy and security of our customers’ information very seriously and are committed to protecting your data. If you have any specific questions about our privacy practices, feel free to contact us for further clarification.

We are here to help and ensure you have a positive experience with FFNHELP. Thank you for choosing us as your service provider.

Access Issues: Solutions and Support

If you are experiencing access issues with our services, FFNHELP Resolution Center is here to provide solutions and support.

If you need to cancel your subscription, simply visit our website and follow the instructions provided. For further assistance, contact us through our customer support hotline or email.

Rest assured that your privacy is important to us. Our Privacy Policy outlines how we collect and use your information to ensure a safe and secure experience for all users.

At FFNHELP Resolution Center, we are committed to resolving access issues promptly and efficiently. Don’t hesitate to reach out for assistance.

Frequently Asked Questions

How do I cancel my FFN help subscription?

To cancel your FFN help subscription, you can email the support team at https://ffnhelp.com and request for your account to be cancelled.

Constantly Running Laptop Fan Fix

by Milton Brown, posted in Hardware And Devices

Are you tired of your laptop fan constantly running at full speed? Let’s explore some simple fixes to help alleviate this common issue.

Optimize System Settings and Update Drivers

Optimize System Settings: Check the Task Manager to see which applications are consuming the most resources on your laptop. Close any unnecessary programs running in the background to reduce strain on your system.

Update Drivers: Make sure all your drivers are up to date, especially the graphics driver, as outdated drivers can cause the fan to work overtime to keep your laptop cool.

Check for Windows Updates: Regularly update your operating system to ensure that your laptop is running efficiently and smoothly. Windows updates often include performance improvements that can help reduce the workload on your system.

Improve Ventilation: Keep your laptop in a well-ventilated area to prevent overheating. Clean out any dust or debris that may be blocking the vents or fans to allow for better airflow.

Monitor Temperature: Use software tools to monitor the temperature of your laptop and take action if it starts to get too hot. Consider investing in a cooling pad to help dissipate heat more effectively.

By optimizing system settings, updating drivers, and taking steps to improve ventilation, you can help fix a constantly running laptop fan and ensure that your device operates at its best.

Clean Laptop Fan and Air Vents

Step Description
1 Turn off your laptop and unplug it from the power source.
2 Locate the air vents on your laptop. They are usually on the sides or bottom of the laptop.
3 Use a can of compressed air to blow out any dust or debris from the air vents. Be sure to hold the can upright while spraying.
4 Open up your laptop and locate the fan. It is usually near the processor and will have a grille over it.
5 Use the compressed air to blow out any dust or debris from the fan. You may also use a soft brush to gently clean the fan blades.
6 Reassemble your laptop and turn it back on. Your fan should now be running more quietly and efficiently.

Ensure Adequate Ventilation and Surface Placement

Open window with laptop placed on a flat surface

When dealing with a constantly running laptop fan, it is crucial to make sure that your device is getting enough ventilation. Placing your laptop on a flat, hard surface will allow for proper airflow and prevent overheating. Avoid using your laptop on soft surfaces like beds or couches, as this can block the vents and cause the fan to work overtime.

In addition to surface placement, regularly check the vents on your laptop for dust and debris. Use a can of compressed air to gently clean out any buildup that may be obstructing airflow. This simple maintenance task can help prevent your laptop fan from constantly running.

If you notice that your laptop fan is still running continuously, check your task manager to see if any applications are using a high amount of CPU or memory. Close any unnecessary programs to reduce the strain on your system’s resources and potentially lower the fan speed.

By ensuring adequate ventilation and proper surface placement for your laptop, you can help fix the issue of a constantly running fan and prolong the life of your device.

Perform Diagnostics and Maintenance Checks

Performing diagnostics and maintenance checks on a constantly running laptop fan is essential to ensure your device is running smoothly.

1. Check Task Manager: Open Task Manager on Windows by right-clicking on the taskbar and selecting it. Look for any applications or processes that are using a high percentage of CPU, as this could be causing the fan to run constantly.

2. Run a malware scan: Use an anti-virus software to scan your laptop for any potential malware that could be causing the fan to work overtime.

3. Update your operating system: Make sure your Windows operating system is up to date by checking for Windows Updates in the settings.

4. Clean the ventilation: Dust and debris can block the laptop’s ventilation system, causing the fan to run constantly. Use a can of compressed air to clean out any dust from the vents.

Frequently Asked Questions

Why is my laptop fan running even when I do nothing?

Your laptop fan is running even when you do nothing because the air vents may be clogged with dust. Use a can of compressed air to clean the vents and prevent the fan from constantly running.

Is it OK for laptop fans to run all the time?

It is not ideal for laptop fans to run all the time. Fans that are constantly running at high speeds can indicate a potential issue with the laptop’s cooling system.

How do I stop my laptop fan from running constantly?

To stop your laptop fan from running constantly, you can adjust the power settings, clean the fan vents, check for suspicious processes, and update the BIOS to help reduce the internal temperature.

Fix Windows 10 printer problems after update

by Milton Brown, posted in Peripheral Device And Printing

Having trouble with your printer after a Windows 10 update? Here’s how to fix it.

Typical Symptoms of Printer Issues

If you are experiencing any of these issues, it is important to troubleshoot the problem to determine the cause. Start by checking the printer driver to ensure it is up to date and compatible with your Windows 10 system. You can do this by accessing the Control Panel and navigating to the Printers and Devices section.

Additionally, make sure that your printer is connected to the correct USB port or wireless network and that there are no connectivity issues with your router or wireless access point. You may also want to try power cycling your printer and computer to see if that resolves the problem.

If none of these solutions work, consider checking for paper jams, low ink levels, or printer malfunctions that may be causing the issue. It may also be helpful to run a diagnostic tool on your printer to identify any specific problems.

Diagnosing and Fixing Common Problems

  • Make sure the printer is properly connected to the computer via USB cable or network connection.
  • If using a network printer, ensure that the network connection is stable and working correctly.

Update Printer Drivers

  • Open Device Manager by pressing Win+X and selecting it from the menu.
  • Locate the printer in the list of devices and right-click on it.
  • Select Update driver and follow the on-screen instructions to download and install the latest driver.

Restart Print Spooler Service

  • Open Run by pressing Win+R and type services.msc to open the Services window.
  • Scroll down and locate Print Spooler in the list of services.
  • Right-click on Print Spooler and select Restart to restart the service.

Run Printer Troubleshooter

  • Open Settings by pressing Win+I and navigate to Update & Security > Troubleshoot.
  • Click on Printer and then click Run the troubleshooter to diagnose and fix common printing problems.

Running the Windows Printer Troubleshooter

To run the Windows Printer Troubleshooter, follow these steps:

1. Click on the Windows Start menu and type “troubleshoot” in the search bar.
2. Select “Troubleshoot settings” from the search results.
3. Scroll down and click on “Printer” under the “Get up and running” section.
4. Click on “Run the troubleshooter” and follow the on-screen instructions to detect and fix any issues with your printer.

If the troubleshooter does not resolve the problem, you may need to update or reinstall the printer driver. To do this:

1. Press the Windows key + X to open the Power User menu.
2. Select “Device Manager” from the list.
3. Locate your printer under the “Print queues” category, right-click on it, and select “Update driver.”
4. Follow the on-screen instructions to update the driver or choose “Uninstall device” to remove the driver and then reinstall it.

If you are still experiencing issues after updating the driver, you may need to restart your computer and printer. Turn off both devices, unplug them from the power source, wait for a few minutes, then plug them back in and power them on. This process, known as power cycling, can sometimes resolve connectivity problems between the computer and printer.

Following these steps should help you fix Windows 10 printer problems after an update. If you continue to experience issues, consider reaching out to your printer manufacturer’s support for further assistance.

Updating Printer Drivers

Printer driver update pop-up notification

To update printer drivers on Windows 10, first, open the Device Manager by right-clicking on the Start menu and selecting it from the list. Look for your printer under the Printers section, right-click on it, and choose Update driver. Select Search automatically for updated driver software and follow the on-screen instructions to complete the update.

If Windows doesn’t find an updated driver automatically, you can visit the manufacturer’s website to download the latest driver for your printer model. Once downloaded, run the installer and follow the prompts to update the driver on your system.

After updating the printer driver, restart your computer to ensure the changes take effect. Try printing a test page to see if the issue has been resolved. If the problem persists, you may need to troubleshoot further or contact the printer manufacturer for additional support.

Removing and Replacing Problematic Drivers

If you are experiencing printer problems after a Windows 10 update, one common culprit may be problematic drivers. To address this issue, you will need to remove the current driver and replace it with a new one.

First, open the Control Panel on your Windows 10 computer. Look for the “Devices and Printers” option and click on it. Find your printer in the list of devices and right-click on it. Select “Remove device” from the drop-down menu to uninstall the current driver.

Next, you will need to download the latest driver for your printer from the manufacturer’s website. Make sure to choose the correct driver for your printer model and operating system.

After downloading the new driver, double-click on the file to install it on your computer. Follow the on-screen instructions to complete the installation process.

Once the new driver is installed, restart your computer and try printing a test page to see if the issue has been resolved.

By removing and replacing problematic drivers, you can often fix Windows 10 printer problems after an update without the need for additional troubleshooting steps.

Ensuring Printer Compatibility with Windows

To ensure printer compatibility with Windows 10 after an update, follow these steps:

Check for Driver Updates: Make sure your printer drivers are up to date. Go to the manufacturer’s website and download the latest drivers for your specific printer model.

Run the Printer Troubleshooter: In Windows 10, you can use the built-in Printer Troubleshooter to diagnose and fix common printer problems. Go to Settings > Update & Security > Troubleshoot > Printer and follow the on-screen instructions.

Restart the Print Spooler Service: Sometimes restarting the Print Spooler service can help resolve printer issues. Open the Services app by searching for it in the Windows search bar, find the Print Spooler service, right-click on it, and select Restart.

If you are still experiencing problems, try removing and re-adding the printer in the Control Panel. Go to Devices and Printers, right-click on your printer, and select Remove device. Then, click on Add a printer and follow the on-screen instructions to re-add the printer.

Installing the Latest Printer Software and Driver

Printer software and driver installation screen.

To install the latest printer software and driver on Windows 10, follow these steps:

1. Open the Control Panel on your computer by searching for it in the Windows search bar.

2. Click on Devices and Printers in the Control Panel window.

3. Find your printer in the list of devices and right-click on it.

4. Select Properties from the dropdown menu.

5. Navigate to the Hardware tab in the Properties window.

6. Click on Properties again at the bottom of the window.

7. Go to the Driver tab and click on Update Driver.

8. Choose Search automatically for updated driver software and follow the on-screen instructions to complete the installation process.

9. Once the driver is updated, restart your computer to ensure the changes take effect.

FAQs

Are some printers not compatible with Windows 10?

Some printers may not be compatible with Windows 10, but newer printers should have built-in drivers for seamless use. Check the Windows 10 Compatibility Center to confirm compatibility.

Is there a problem with HP printers and Windows 10?

There may be compatibility issues between some HP printers and Windows 10, leading to operational problems. To address this, you can refer to specific support documents for your Windows 10 version to ensure your printer is supported and has the correct software drivers.

Why is my printer printing messed up?

Your printer may be printing messed up due to clogged or backed up printer heads caused by dust, dirt, or dried ink. This can result in heavy or light ink, known as ‘banding’, which is often caused by faulty printer drivers or hardware. Check the print head for clogs or banding and replace it if necessary.

How do I fix printer problems after Windows 10 update?

To fix printer problems after a Windows 10 update, you can try unplugging and restarting your printer, checking cables or wireless connection, uninstalling and reinstalling your printer, installing the latest driver for your printer, clearing and resetting the print spooler, and changing the printer’s status to “online.”

Windows 10 power settings not working – Fix Available

by Milton Brown, posted in System Settings And Customization

Are you experiencing issues with your Windows 10 power settings not working properly? There is a fix available to help resolve this issue.

Utilize Windows Power Troubleshooter

If you are experiencing issues with your Windows 10 power settings not working, you can utilize the Windows Power Troubleshooter to help resolve the issue.

To access the Windows Power Troubleshooter:
– Press the Windows key + S to open the search bar
– Type in “Troubleshoot settings” and select the option
– Scroll down to find “Power” and click on it
– Click on “Run the troubleshooter”

Follow the on-screen instructions to let the troubleshooter scan your system for any power-related issues and apply the necessary fixes.

If the Windows Power Troubleshooter does not resolve the problem, you can also try resetting your power plan settings to default. To do this:
– Press the Windows key + X
– Select “Power Options”
– Click on “Choose what the power buttons do”
– Select “Restore default settings for this plan”

If the issue persists, consider checking for any updates or patches that may be available for your system. Additionally, running a system scan for malware or viruses could also help in resolving the issue.

Restore Power Settings via Command Prompt

Command Description
powercfg -restoredefaultschemes Restores the default power schemes to their original state.
powercfg -setacvalueindex SCHEME SUB_GUID SETTING INDEX Sets the value of a power setting for the specified scheme on AC power.
powercfg -setdcvalueindex SCHEME SUB_GUID SETTING INDEX Sets the value of a power setting for the specified scheme on battery power.
powercfg -setactive SCHEME Sets the specified scheme as the active power scheme.
powercfg -list Lists all available power schemes on the system.

Conduct SFC and DISM Scans

Next, run a DISM scan by typing dism /online /cleanup-image /restorehealth in the Command Prompt window and pressing Enter. This will check for component store corruption and repair any issues found. After both scans are complete, restart your computer and check if the power settings are working properly.

If the issue persists, consider performing a System Restore to revert your system to a previous state when the power settings were functioning correctly. Additionally, ensure your Windows is up to date by checking for updates in the Windows Update settings. Following these steps should help resolve the Windows 10 power settings issue.

Perform a System Restore

1. Open the Control Panel by pressing the Windows key + X, then selecting Control Panel from the menu.

2. In the Control Panel, type “Recovery” in the search bar at the top right corner.

3. Click on “Open System Restore” and follow the on-screen instructions to choose a restore point.

After selecting a restore point, your computer will restart and the System Restore process will begin. This will revert your system files and settings to a previous state, potentially fixing any issues with power settings.

If the power settings are still not working after the System Restore, you may need to further troubleshoot the issue. Consider checking for any recent updates, running a malware scan, or updating device drivers. Reverting any recent changes to the system may also help resolve the problem.

Address Malware and Conduct a Full System Checkup

To fix Windows 10 power settings not working, it is essential to address any malware that may be affecting your system. Run a full system scan using a reliable antivirus program to detect and remove any malicious software that could be causing the issue.

Check Windows Registry and System Files

Next, perform a thorough check of the Windows Registry and system files for any errors or corruption. Use the Command Prompt to run the ‘sfc /scannow’ command to scan and repair corrupted system files. Additionally, check for any recent changes made to the Registry that may be impacting power settings.

Update Device Drivers and Windows

Ensure that all device drivers are up to date, especially those related to power management. Use Windows Update to install any available updates for your system, including patches that may address power settings issues.

Reset Power Settings

If the problem persists, reset your power settings to default. Press the Windows key + X, then select “Power Options.” Click on “Choose what the power buttons do” and then “Restore default settings for this plan.”

F.A.Qs

Why my power option is not working?

My power option is not working because there may be missing or corrupt system files. To resolve this issue, you can run SFC and DISM scans to automatically fix any errors in the Windows system files.

How do I restore power settings in Windows 10?

To restore power settings in Windows 10, you can go to the Power Options applet, then select the plan you want to reset and click on “Change plan settings.” From there, choose “Change advanced power settings” and then click on the “Restore plan defaults” button.

Why is Windows not letting me change power mode?

Windows may not be allowing you to change power mode due to settings or restrictions in the Power & battery settings. To resolve this issue, try accessing Power Options in Control Panel and selecting a Balanced power plan that suits your needs on your Windows 10 PC.

How do I fix Windows 10 settings not working?

To fix Windows 10 settings not working, try restarting your computer, opening Settings in different ways, running a system file check, using the Windows Update Troubleshooter, and reinstalling the Settings app.

Preview Pane Not Working in Windows 10? Ways to Fix Error

by Milton Brown, posted in Software And Applications

Having trouble with your preview pane in Windows 10? Here are some ways to fix the error.

Optimize File Explorer and Preview Settings

First, check if the Preview Pane is enabled in File Explorer. To do this, open File Explorer, click on the “View” tab, and then click on the “Preview Pane” option. Make sure it is checked.

Next, adjust the size of the Preview Pane to see if that resolves the issue. Click and drag the divider between the Preview Pane and the file list to resize it.

If the Preview Pane is still not working, try resetting the File Explorer settings. Open File Explorer, go to the “View” tab, and click on “Options.” In the Folder Options window, go to the “View” tab, and click on “Reset Folders.”

If all else fails, you can try rebuilding the Windows Search index. Press the Windows key + R, type “control panel,” and press Enter. In the Control Panel, search for “Indexing Options” and click on it. Click on “Advanced,” and then click on “Index Settings.” Click on “Rebuild” to rebuild the index.

Troubleshoot and Restart System Processes

To troubleshoot system processes, you can try restarting the Windows Explorer process. To do this, press Ctrl + Shift + Esc to open the Task Manager. Then, find the Windows Explorer process in the list of running processes, right-click on it, and select Restart. This may help resolve any issues causing the preview pane to not work properly.

Another option is to check if any other system processes are causing conflicts with the preview pane. You can do this by restarting your computer in Safe Mode. To do this, go to the Start menu, click on the power button, hold down the Shift key, and click on Restart. This will restart your computer in Safe Mode, where you can check if the preview pane is working correctly.

If the preview pane still does not work after troubleshooting and restarting system processes, you may need to consider other solutions such as checking for updates, running a system scan for malware, or resetting your Windows settings.

Update or Reset Operating System

If the preview pane is not working in Windows 10, one possible solution is to update or reset the operating system. This can help resolve any underlying issues that may be causing the error.

To update the operating system, go to the Settings menu and select “Update & Security.” From there, click on “Windows Update” and check for any available updates. Install any updates that are available and restart your computer.

If updating the operating system does not fix the issue, you can try resetting it. This will restore Windows to its default settings, which can sometimes resolve problems with the preview pane.

To reset the operating system, go to the Settings menu and select “Update & Security.” Click on “Recovery” and then select “Reset this PC.” Follow the on-screen instructions to reset your operating system.

If neither updating nor resetting the operating system resolves the issue, you may need to seek further assistance from a professional or Microsoft support.

Utilize Alternative Tools and Accounts

  • Try using a different email client: If the Preview Pane is not working with your current email client, try using a different one to see if the issue persists.
  • Log in with a different user account: Create a new user account on your Windows 10 system and log in with that account to check if the Preview Pane works for the new account.
  • Use a different browser: If you are accessing your emails through a web browser, try using a different browser to see if the Preview Pane works in that browser.

FAQs

How do I fix no preview available?

To fix “no preview available,” you can check if the Preview Pane is enabled, rule out file specific issues, restart Windows Explorer, adjust Folder Options settings, check for hard disk issues, update the graphics driver, adjust Advanced System Properties, and run a malware scan.

What does preview not available mean?

Preview not available means that when a user tries to preview an untrusted image attachment in an email, a window will appear stating “No Preview Available”. This is a security measure to prevent potential harm to the device from executing the image file.

Why is my PDF preview not working?

Your PDF preview may not be working because you are not using a PDF reader that supports thumbnail preview, your PDF reader is outdated, the PDF file is damaged, or you haven’t set the PDF reader that supports thumbnail preview as the default in Windows 11.

How do I enable file preview?

To enable file preview, you can open Windows File Explorer, go to the View menu, hover over Show, and then select Preview pane.

Fix Windows Preparing Automatic Repair Loop

by Milton Brown, posted in Windows OS

Dealing with the Windows Preparing Automatic Repair loop can be frustrating and time-consuming.

Causes of Automatic Repair Loops

Blue screen of death

One common cause of Automatic Repair Loops is a corrupt Windows Registry. This can happen due to sudden power loss or improper shutdowns. To fix this issue, you can try using the Windows Preinstallation Environment to repair the Registry.

Another possible cause is a malware infection. Run a full system scan using your antivirus software to remove any malicious programs that may be causing the loop. Booting into Safe Mode before running the scan can help in removing stubborn malware.

A corrupted system file can also trigger the Automatic Repair Loop. Use a Windows Setup or boot disk to access the Command Prompt and run the “sfc /scannow” command to repair any damaged files. This should help resolve the issue and prevent the loop from reoccurring.

Symptoms of Automatic Repair Errors

  • Check for Disk Errors:

    • Open Command Prompt as an administrator
    • Type chkdsk /f /r C: and press Enter
    • Restart your computer and let it scan for disk errors
  • Disable Automatic Repair:

    • Open Command Prompt as an administrator
    • Type bcdedit /set recoveryenabled NO and press Enter
      Open Command Prompt as an administrator Type bcdedit /set recoveryenabled NO and press Enter
    • Restart your computer to disable automatic repair
  • Check System Files:

    • Open Command Prompt as an administrator
    • Type sfc /scannow and press Enter
    • Wait for the system file checker to complete and fix any errors

Perform a Hard Reboot

1. First, shut down your computer completely by holding down the power button until it powers off.
2. Once the computer is off, turn it back on by pressing the power button.
3. As soon as the computer starts to boot up, press and hold the power button again to force a shutdown.
4. Repeat this process a few times until you see a message indicating that Windows did not shut down properly.
5. At this point, let Windows attempt to repair itself automatically. This may resolve the issue and allow you to boot into Windows successfully.

If the automatic repair does not work, you may need to try other solutions such as booting into safe mode, using a Windows Setup or boot disk, or running antivirus software to check for any potential viruses causing the loop.

Boot into Safe Mode to Troubleshoot

To troubleshoot the Windows Preparing Automatic Repair Loop, you can boot into Safe Mode. This will allow you to access your computer in a limited state, which can help identify and fix the issue.

To boot into Safe Mode on Windows 10:
1. Restart your computer.
2. Press the F8 key repeatedly as your computer boots up.
3. Select “Safe Mode” from the boot options menu.

Once in Safe Mode, you can try running a virus scan, checking for corrupted files, or tweaking settings in the Windows Registry. If you’re unable to access Safe Mode, you may need to create a Windows 10 USB flash drive to boot from.

Extend System Reserved Partition

To extend the System Reserved Partition and fix the Windows Preparing Automatic Repair Loop, you can follow these steps. First, **download** a reliable disk partitioning tool such as EaseUS Partition Master. Next, **install** and **launch** the software on your personal computer. After that, **locate** the System Reserved Partition on your hard disk drive.

**Right-click** on the System Reserved Partition and choose the option to **extend** it. **Follow** the on-screen instructions to increase the size of the partition. Once the extension process is complete, **reboot** your computer.

By extending the System Reserved Partition, you can potentially resolve issues causing the Windows Preparing Automatic Repair Loop. It’s important to **backup** your data before making any changes to avoid data loss. This method has been successful for users with Dell, Lenovo, Asus, Hewlett-Packard, and Acer Inc. laptops experiencing this problem.

Disable Automatic Repair at Boot

Step 1: Insert a Windows installation media (such as a USB flash drive or DVD) into your computer.

Step 2: Boot your computer from the installation media.

Step 3: Select your language, time, currency, and keyboard input, then click “Next.”

Step 4: Click on “Repair your computer” at the bottom left corner.

Step 5: Select “Troubleshoot” > “Advanced options” > “Command Prompt.”

Step 6: In the Command Prompt window, type “bcdedit /set {default} recoveryenabled No” and press Enter.

Step 7: Restart your computer and see if the Automatic Repair loop issue is resolved.

Restore the Windows Registry

1. Boot your computer into the Windows Preinstallation Environment.
2. Once in the command prompt, type: cd C:\Windows\System32\config
3. Then, type: ren SYSTEM SYSTEM.OLD and ren SOFTWARE SOFTWARE.OLD
4. Next, type: copy C:\Windows\System32\config\RegBack\SYSTEM and copy C:\Windows\System32\config\RegBack\SOFTWARE
5. Restart your computer and see if the issue is resolved.

If this method does not work, you may need to consider other troubleshooting options such as running a virus scan, checking for corrupt system files, or repairing the Windows installation.

Reinstall Windows for a Fresh Start

To fix the Windows Preparing Automatic Repair loop, a fresh start by reinstalling Windows can often resolve the issue. First, you will need to create a Windows installation media. This can be done by downloading the Windows Media Creation Tool from the Microsoft website and following the prompts to create a bootable USB drive or DVD.

Next, insert the installation media into your computer and restart it. Press the necessary key (often F2, F12, ESC, or DEL) to access the boot menu and select the installation media as the boot device. Follow the on-screen instructions to begin the Windows installation process.

Choose to “Custom install” Windows and select the disk partition where Windows is currently installed. Delete this partition and create a new one to reinstall Windows from scratch. Complete the installation process by following the prompts and entering your product key if required.

After reinstalling Windows, make sure to reinstall any necessary drivers and software.

Use Bootable Data Recovery Software

First, download a bootable data recovery software such as Disk Drill or Recuva onto a separate device.

Next, create a bootable USB drive or CD using the software and insert it into the affected computer.

Restart the computer and boot from the USB drive or CD. Follow the on-screen instructions to run the data recovery software.

By using bootable data recovery software, you can bypass the Windows Preparing Automatic Repair loop and retrieve your important files.

Run System File Checker & CHKDSK Utility

Run System File Checker: To fix the Windows Preparing Automatic Repair Loop, you can use the System File Checker utility to scan and repair corrupted system files. Open Command Prompt as an administrator by searching for it in the Start menu, then type “sfc /scannow” and press Enter. Allow the scan to complete, and restart your computer if any issues are found.

CHKDSK Utility: Another helpful tool is the CHKDSK utility, which checks the integrity of your hard drive. Open Command Prompt as an administrator, then type “chkdsk C: /f /r” and press Enter. Replace “C:” with the letter of your main drive. Follow the prompts to schedule a disk check on the next restart.

By running these utilities, you can potentially resolve issues causing the Windows Preparing Automatic Repair Loop. If the problem persists, consider seeking further assistance from a professional or contacting the manufacturer of your computer.

FAQs

How to fix your laptop when it says preparing automatic repair?

To fix your laptop when it says preparing automatic repair, you can try forcing a shutdown by pressing and holding the Power button three times. This may help the system enter the boot repair page after a couple of reboots. From there, you can choose “Troubleshoot” and proceed with either refreshing or resetting the PC.

How do I get out of automatic repair loop?

To get out of an automatic repair loop, you can try running Fixboot and Chkdsk commands, performing a system scan in safe mode, restoring the Windows registry, disabling the automatic repair tool, disabling early launch anti-malware, and performing a hard reboot.

Why does my computer keep going into automatic repair?

Your computer may be going into automatic repair due to a variety of issues such as missing or corrupted system files, problems with Windows Registry, incompatible hard drives, file corruption in Windows Boot Manager, or a faulty Windows update.

How do I fix HP stuck on preparing automatic repair?

To fix HP stuck on preparing automatic repair, you can try performing a hard reset. Disconnect the power adapter and remove the battery (if possible), then hold down the power button for 15 seconds. Reconnect the power adapter and battery, then try turning on the laptop again.

Fix Asus Transformer Book Camera Not Working on Windows 11/10

by Milton Brown, posted in Hardware And Devices

Having trouble with your Asus Transformer Book camera not working on Windows 11/10?

Enable Camera Access in Settings

1. Press the Windows key + I to open the Settings menu.
2. Click on Privacy and select Camera from the left-hand menu.
3. Make sure that the toggle switch under “Allow apps to access your camera” is turned On.
4. Scroll down to the “Choose which apps can access your camera” section and ensure that the toggle switch next to the desired apps is also turned On.

By following these steps, you should be able to fix the issue with your Asus Transformer Book camera not working. If the problem persists, you may need to check for any pending Windows updates or reinstall the camera driver.

Remember to also check your privacy settings and ensure that the camera lens is free from any dust or debris that may be obstructing the lens. If you are still experiencing issues, refer to the user guide or FAQ section on the Asus website for further troubleshooting tips.

Ensuring that the camera has the necessary permissions and settings enabled should help resolve the problem and allow you to use your camera for video calls, recording, or any other applications that require camera access.

Activate Camera with Hotkey

Asus Transformer Book keyboard with hotkey symbol

Step Description
1 Press the Windows key + X to open the Power User menu.
2 Select Device Manager from the list.
3 Expand the Imaging devices section.
4 Right-click on your camera device and select Enable device.
5 Press the Windows key + I to open Settings.
6 Go to Privacy and select Camera.
7 Make sure that Camera access for this device is turned on.
8 Press the Fn key + the hotkey for your camera (usually F6 or F7) to activate the camera.

Update Webcam Drivers

Asus Transformer Book webcam icon

To update the webcam drivers for your Asus Transformer Book on Windows 11/10, follow these steps:

1. Open the Device Manager by pressing the Windows key + X on your keyboard and selecting “Device Manager” from the menu.

2. Locate the “Imaging devices” or “Cameras” category and expand it to find your webcam.

3. Right-click on your webcam and select “Update driver” from the context menu.

4. Choose the option to automatically search for updated driver software.

5. If Windows finds an updated driver, follow the on-screen instructions to install it.

6. Alternatively, you can visit the Asus support website to download the latest driver for your specific model.

7. Install the downloaded driver by following the installation instructions provided.

8. After updating the webcam drivers, restart your computer to apply the changes.

If your Asus Transformer Book camera is still not working after updating the drivers, you may need to troubleshoot further or contact Asus customer support for assistance.

Reinstall Camera Drivers

To fix the Asus Transformer Book camera not working on Windows 11/10, one of the first steps you can take is to reinstall the camera drivers. This can help resolve any potential software conflicts or issues that may be causing the problem.

To reinstall the camera drivers, you can follow these steps:

1. Press the Windows key + X on your keyboard to open the Power User menu and select Device Manager.
2. In Device Manager, locate the camera device under the Imaging devices or Cameras category.
3. Right-click on the camera device and select Uninstall device.
4. Reboot your computer to allow Windows to reinstall the camera drivers automatically.

If the camera still isn’t working after reinstalling the drivers, you may want to try updating the drivers instead. You can do this by following these steps:

1. Right-click on the camera device in Device Manager and select Update driver.
2. Choose the option to search automatically for updated driver software.
3. Follow the on-screen instructions to complete the driver update process.

Hopefully, reinstalling or updating the camera drivers will resolve the issue with your Asus Transformer Book camera not working on Windows 11/10. If you continue to experience problems, you may need to consider other troubleshooting steps or seek further assistance from Asus support.

Exploring Alternative Webcam Solutions

  • Try using an external webcam to see if the issue lies with the built-in camera on your Asus Transformer Book.
  • Check for driver updates to ensure that your camera is compatible with Windows 11/10.
  • Reset the camera app in Windows settings to refresh the camera software.
  • Restart your device to see if that resolves the camera not working issue.
  • Run the hardware troubleshooter to diagnose and fix any hardware issues with the camera.
  • Disable and enable the camera in Device Manager to reset the camera settings.
  • Update Windows to the latest version to ensure compatibility with the camera on your Asus Transformer Book.
  • Consult Asus customer support for technical assistance with troubleshooting the camera not working problem.
    Update Windows to the latest version to ensure compatibility with the camera on your Asus Transformer Book. Consult Asus customer support for technical assistance with troubleshooting the camera not working problem.

FAQs

Why is my camera on my Asus laptop not working?

Your camera on your Asus laptop may not be working due to privacy settings, function keys linked to the webcam, outdated device drivers, or antivirus programs. It is important to check these factors as different Asus laptop models may have varying issues. Additionally, Windows settings could also be causing interference with the camera functionality. Working with device drivers can be complex as well.

How do I activate my camera on my Asus laptop?

To activate the camera on your Asus laptop, press the F10 key on the keyboard or use the designated combination key. Look for the notice of “Camera On” displayed on the screen to confirm that the camera is ready to use. For more information, refer to ASUS Keyboard hotkeys introduction.

Why is my Asus camera showing a black screen?

Your Asus camera is showing a black screen most likely due to faulty or outdated drivers. Repairing the drivers using the Device Manager tool can help resolve this issue.